Polydamp® Acoustical Barrier,
PAB-0X0, is a dense filled vinyl based polymer designed
to offer transmission loss properties over a broad frequency range. X =
0.5, 1.0, 1.5, and 2.0 lb/sf.
Polydamp® Acoustical Barrier Composite,
is a dense filled vinyl based polymer designed to offer transmission
loss properties over a broad frequency range. It has a ¼
layer of acoustical foam on one side with psa on the foam side. The
barrier is available in weights of 0.5, 1.0, 1.5, and 2.0 lb/sf.
The decoupling layer acts as an isolator, allowing the barrier to
function at it?s optimum level.
Polydamp® Acoustical Barrier
is a noise barrier composite consisting of an absorber foam with a film
face, a barrier layer of filled vinyl and, a foam decoupler layer. An
adhesive backing and edge sealing are optional. Available with a
variety of decorative/ protective film facings such as:
-TearTuf® Polyester (A Polymer Technology development), in
metalized, reinforced metalized, and clear.
-Tedlar® in white, charcoal and gray.
-Tuffylm® urethane in black, bone, gray and white.
In the PABA composite, the acoustical foam lowers sound pressure levels
of incident sound waves, while the barrier layer blocks the passage of
Polydamp®Pyramid Floormat (PAB-011-PYCC)
is a dense filled vinyl with a pyramid pattern surface combined with a
¼ closed cell foam. It is designed to isolate noise being
through the floor of off-highway construction, and over-the-road
vehicles. The patterned surface is skid resistant, and easily swept
clean due to its non-directional pattern.
Polydamp® Ribbed Floormat (PAB-XXX-RBCC)
is composed of a dense, flexible filled vinyl with a ribbed pattern
surface. It is designed to isolate noise being transmitted through
floors of off-highway, construction, and over the road vehicles.
Polydamp® Acoustical Barrier with Twist
Black facing (PAB-011-TB)
is a heavy duty floormat for vehicle and equipment cabs. The rug like
vinyl wear surface resists abrasion and offers a durable, non skid
surface for sure footing. PAB barrier floormat weighs one (1) pound per
square foot and is backed with a one quarter (1/4) inch thick open cell
Polyurethane foam decoupler. PAB-011-TB is available with a 3 mil
Acrylic pressure sensitive adhesive layer.
Used on the floor of heavy trucks, heavy equipment and occupational
vehicle cabs. The floor mat offers increased transmission loss
performance to reduce the noise in the operator cab.
Polydamp® Acoustical Lead
Barrier (PALA), is
a noise barrier composite consisting of an absorber foam with an
optional film facing or embossed surface, a barrier layer of acoustical
lead, a foam decoupler layer with an optional pressure sensitive
adhesive backing (PSA).